192.168.1.250 is the factory default fallback IP address used by Netgear WiFi range extenders (EX and EAX series). When your device is not yet connected to a host router, you can access the admin panel directly by typing this IP into your browser address bar.
How to Access 192.168.1.250
Connect your laptop or phone to the Netgear extender default WiFi network (SSID printed on the label), or plug in an Ethernet cable directly to the extender LAN port.
Turn off mobile/cellular data on your device and disconnect any active VPN connections, as these can redirect traffic away from the local IP address.
Open any web browser and type http://192.168.1.250 in the address bar. Press Enter.
On the Netgear login screen, enter the default username admin and default password password. If you have already set a custom password, use that instead.
Once logged in, you can complete the initial setup wizard, change WiFi passwords, update firmware, or check your extender status.
http:// before the IP address in your browser's address bar, not the search bar.Setup & Login Guides for Brands Using 192.168.1.250
Troubleshooting: Can't Access 192.168.1.250?
Page will not load
Make sure you are connected directly to the extender WiFi (not your main router). Disconnect mobile data. Try typing http://192.168.1.250 with the http:// prefix.
Wrong IP after connecting to router
Once connected to your home network, your router DHCP server assigns the extender a new dynamic IP. Check your main router admin panel under Attached Devices or DHCP Client List.
Credentials rejected
If admin/password does not work, the extender was previously configured. Perform a factory reset by holding the Reset pinhole button for 10 seconds, then retry.
Try mywifiext.net instead
If the IP does not load, try mywifiext.net instead which is Netgears official local web address for extender setup.
Frequently Asked Questions About 192.168.1.250
What is 192.168.1.250 used for?
192.168.1.250 is the factory default fallback IP address for Netgear WiFi range extenders. It provides direct local access to the extender web-based admin panel for setup and configuration without requiring an internet connection.
Why does 192.168.1.250 not open in my browser?
The most common reasons are: your device is connected to your main router rather than the extender directly, mobile data is enabled, or a VPN is active. Ensure you are connected to the extender own SSID, disable cellular data, and disconnect any VPN.
What is the default username and password for 192.168.1.250?
For Netgear extenders, the default username is admin and the default password is password. On newer models, you will be prompted to create a custom password during first-time setup.
Can I use mywifiext.net instead of 192.168.1.250?
Yes. mywifiext.net is Netgear official local web address and resolves to the same admin panel. It often works more reliably than the numeric IP, especially on mobile devices.