Mercusys Router Default Login, IP & Password Guide
Setup interface for Mercusys MR series (Wi-Fi 6), Halo mesh systems, and wireless N/AC routers.
Use these verified administrative credentials and network addresses to access your Mercusys router's local setup dashboard.
mwlogin.net192.168.1.1192.168.1.1192.168.0.1admin(Created on First Visit)MERCUSYS_XXXXMercusys requires creating a new 6-32 character login password immediately on first visit to mwlogin.net.
Follow this 4-step walkthrough to access your Mercusys management settings in less than 2 minutes.
Step 1: Connect to Network
Connect device to MERCUSYS Wi-Fi network (no password by default).
Step 2: Open Web GUI or Gateway IP
Open browser to http://mwlogin.net or http://192.168.1.1.
Step 3: Enter Admin Credentials
Create a new administrator password on the initial welcome screen.
Step 4: Configure Settings & Save
Configure your WAN connection and Wi-Fi password.
These default credentials and IP addresses apply to the following popular Mercusys wireless routers, mesh nodes, and modem gateways:
If the default password doesn't work or you forgot your custom administrator password, resetting the router restores all factory default settings.
- Make sure your Mercusys router is connected to power and the power LED is solid ON.
- Locate the physical Reset pinhole button on the back or bottom panel of the unit.
- Use a straightened paperclip, SIM ejector tool, or pin to press and hold down the Reset button for 10 to 15 seconds.
- Release the button once the front panel LED indicator lights begin flashing or turn amber.
- Wait 2 to 3 minutes for the router to complete its reboot cycle.
- Reconnect to the factory default Wi-Fi network (
MERCUSYS_XXXX) and log in using usernameadminand password(Created on First Visit).
Cannot reach mwlogin.net or 192.168.1.1 in browser
Ensure your device is connected directly to your Mercusys router's Wi-Fi network or plugged into a numbered LAN port with an Ethernet cable. If you are connected to cellular data or an active VPN, disconnect them as they route DNS requests away from the local router gateway.
Default login password "(Created on First Visit)" is not accepted
Check the physical sticker on the bottom or back of your Mercusys router. Many modern models print a unique factory admin password or Wi-Fi key. If the password was changed during initial setup and forgotten, press the Reset pinhole button for 10 seconds to restore factory credentials.
Browser displays "Connection Not Private" or SSL Certificate Warning
Most local router administration consoles use self-signed SSL certificates when accessed via HTTPS (https://192.168.1.1). Click "Advanced" and select "Proceed to 192.168.1.1 (unsafe)" to continue securely to the local management dashboard.
How to discover your Mercusys router's exact gateway IP address
On Windows, press Win+R, type "cmd", hit Enter, and run "ipconfig". Look for the "Default Gateway" IPv4 address. On Mac, open System Settings > Network > Wi-Fi > Details > TCP/IP to find the "Router" IP.
What is the default IP address and login for Mercusys routers?
The primary default gateway IP address for Mercusys routers is 192.168.1.1 (with fallback subnets 192.168.0.1). The default web administrative address is mwlogin.net. Out of the box, the default username is admin and the default password is (Created on First Visit).
How do I log in to my Mercusys router settings?
1) Connect your computer or phone to your Mercusys Wi-Fi or plug into a LAN Ethernet port.
2) Open a browser and type http://mwlogin.net or http://192.168.1.1.
3) Enter username admin and password (Created on First Visit).
4) Access the dashboard to configure Wi-Fi password, SSID name, port forwarding, and security settings.
How do I factory reset my Mercusys router?
With the Mercusys router powered ON, locate the small Reset pinhole on the rear or bottom panel. Insert an unfolded paperclip or pin and hold the button down for 10 to 15 seconds until the power and Wi-Fi LEDs start flashing. Release the button and wait 2-3 minutes for the router to reboot into factory default state.
Does Mercusys have an official mobile app for setup and controls?
Yes, Mercusys offers the MERCUSYS App available for iOS and Android smartphones. You can use it to set up new networks, monitor connected devices, run speed tests, and pause internet access.
How do I change the Wi-Fi name (SSID) and password on my Mercusys router?
Log in to the Mercusys admin page (http://192.168.1.1), navigate to Wireless, Wi-Fi Settings, or Basic > Wireless. Update the 2.4 GHz and 5 GHz Network Name (SSID) and set a secure WPA2/WPA3 password. Click Apply or Save to restart the wireless radios with your new settings.
Explore default login guides and IP addresses for alternative router brands: