TP-Link Deco Router Default Login, IP & Password Guide
Whole home mesh Wi-Fi system portal for TP-Link Deco X, XE (6E), and BE (Wi-Fi 7) series.
Use these verified administrative credentials and network addresses to access your TP-Link Deco router's local setup dashboard.
tplinkdeco.net192.168.68.1192.168.68.1192.168.0.1TP-Link ID AccountTP-Link ID PasswordDeco_XXXXDeco mesh systems use 192.168.68.1 subnet. Configuration is performed primarily through the TP-Link Deco app.
Follow this 4-step walkthrough to access your TP-Link Deco management settings in less than 2 minutes.
Step 1: Connect to Network
Download TP-Link Deco App and connect phone via Bluetooth to the main Deco unit.
Step 2: Open Web GUI or Gateway IP
Follow in-app wizard to select internet connection and create Wi-Fi name.
Step 3: Enter Admin Credentials
Add additional Deco satellites with one tap.
Step 4: Configure Settings & Save
Access web portal at http://tplinkdeco.net or 192.168.68.1 for advanced network map.
These default credentials and IP addresses apply to the following popular TP-Link Deco wireless routers, mesh nodes, and modem gateways:
If the default password doesn't work or you forgot your custom administrator password, resetting the router restores all factory default settings.
- Make sure your TP-Link Deco router is connected to power and the power LED is solid ON.
- Locate the physical Reset pinhole button on the back or bottom panel of the unit.
- Use a straightened paperclip, SIM ejector tool, or pin to press and hold down the Reset button for 10 to 15 seconds.
- Release the button once the front panel LED indicator lights begin flashing or turn amber.
- Wait 2 to 3 minutes for the router to complete its reboot cycle.
- Reconnect to the factory default Wi-Fi network (
Deco_XXXX) and log in using usernameTP-Link ID Accountand passwordTP-Link ID Password.
Cannot reach tplinkdeco.net or 192.168.68.1 in browser
Ensure your device is connected directly to your TP-Link Deco router's Wi-Fi network or plugged into a numbered LAN port with an Ethernet cable. If you are connected to cellular data or an active VPN, disconnect them as they route DNS requests away from the local router gateway.
Default login password "TP-Link ID Password" is not accepted
Check the physical sticker on the bottom or back of your TP-Link Deco router. Many modern models print a unique factory admin password or Wi-Fi key. If the password was changed during initial setup and forgotten, press the Reset pinhole button for 10 seconds to restore factory credentials.
Browser displays "Connection Not Private" or SSL Certificate Warning
Most local router administration consoles use self-signed SSL certificates when accessed via HTTPS (https://192.168.68.1). Click "Advanced" and select "Proceed to 192.168.68.1 (unsafe)" to continue securely to the local management dashboard.
How to discover your TP-Link Deco router's exact gateway IP address
On Windows, press Win+R, type "cmd", hit Enter, and run "ipconfig". Look for the "Default Gateway" IPv4 address. On Mac, open System Settings > Network > Wi-Fi > Details > TCP/IP to find the "Router" IP.
What is the default IP address and login for TP-Link Deco routers?
The primary default gateway IP address for TP-Link Deco routers is 192.168.68.1 (with fallback subnets 192.168.0.1). The default web administrative address is tplinkdeco.net. Out of the box, the default username is TP-Link ID Account and the default password is TP-Link ID Password.
How do I log in to my TP-Link Deco router settings?
1) Connect your computer or phone to your TP-Link Deco Wi-Fi or plug into a LAN Ethernet port.
2) Open a browser and type http://tplinkdeco.net or http://192.168.68.1.
3) Enter username TP-Link ID Account and password TP-Link ID Password.
4) Access the dashboard to configure Wi-Fi password, SSID name, port forwarding, and security settings.
How do I factory reset my TP-Link Deco router?
With the TP-Link Deco router powered ON, locate the small Reset pinhole on the rear or bottom panel. Insert an unfolded paperclip or pin and hold the button down for 10 to 15 seconds until the power and Wi-Fi LEDs start flashing. Release the button and wait 2-3 minutes for the router to reboot into factory default state.
Does TP-Link Deco have an official mobile app for setup and controls?
Yes, TP-Link Deco offers the TP-Link Deco App available for iOS and Android smartphones. You can use it to set up new networks, monitor connected devices, run speed tests, and pause internet access.
How do I change the Wi-Fi name (SSID) and password on my TP-Link Deco router?
Log in to the TP-Link Deco admin page (http://192.168.68.1), navigate to Wireless, Wi-Fi Settings, or Basic > Wireless. Update the 2.4 GHz and 5 GHz Network Name (SSID) and set a secure WPA2/WPA3 password. Click Apply or Save to restart the wireless radios with your new settings.
Explore default login guides and IP addresses for alternative router brands: