OpenWrt Router Default Login, IP & Password Guide
Open source Linux operating system for embedded networking hardware, routers, and gateways.
Use these verified administrative credentials and network addresses to access your OpenWrt router's local setup dashboard.
192.168.1.1openwrt.lan192.168.1.1192.168.1.1root(Leave Blank - Set on LuCI)OpenWrt (Disabled by default)Factory default login user is 'root' with NO password. Wi-Fi is disabled by default for security until configured.
Follow this 4-step walkthrough to access your OpenWrt management settings in less than 2 minutes.
Step 1: Connect to Network
Connect your computer to a LAN port on the OpenWrt router using an Ethernet cable.
Step 2: Open Web GUI or Gateway IP
Open your browser and navigate to http://192.168.1.1 (or use SSH `ssh root@192.168.1.1`).
Step 3: Enter Admin Credentials
Click Login on the LuCI web interface (no password required initially).
Step 4: Configure Settings & Save
Go to System -> Administration and set a root password, then enable Wireless under Network -> Wireless.
These default credentials and IP addresses apply to the following popular OpenWrt wireless routers, mesh nodes, and modem gateways:
If the default password doesn't work or you forgot your custom administrator password, resetting the router restores all factory default settings.
- Make sure your OpenWrt router is connected to power and the power LED is solid ON.
- Locate the physical Reset pinhole button on the back or bottom panel of the unit.
- Use a straightened paperclip, SIM ejector tool, or pin to press and hold down the Reset button for 10 to 15 seconds.
- Release the button once the front panel LED indicator lights begin flashing or turn amber.
- Wait 2 to 3 minutes for the router to complete its reboot cycle.
- Reconnect to the factory default Wi-Fi network (
OpenWrt (Disabled by default)) and log in using usernamerootand password(Leave Blank - Set on LuCI).
Cannot reach 192.168.1.1 or 192.168.1.1 in browser
Ensure your device is connected directly to your OpenWrt router's Wi-Fi network or plugged into a numbered LAN port with an Ethernet cable. If you are connected to cellular data or an active VPN, disconnect them as they route DNS requests away from the local router gateway.
Default login password "(Leave Blank - Set on LuCI)" is not accepted
Check the physical sticker on the bottom or back of your OpenWrt router. Many modern models print a unique factory admin password or Wi-Fi key. If the password was changed during initial setup and forgotten, press the Reset pinhole button for 10 seconds to restore factory credentials.
Browser displays "Connection Not Private" or SSL Certificate Warning
Most local router administration consoles use self-signed SSL certificates when accessed via HTTPS (https://192.168.1.1). Click "Advanced" and select "Proceed to 192.168.1.1 (unsafe)" to continue securely to the local management dashboard.
How to discover your OpenWrt router's exact gateway IP address
On Windows, press Win+R, type "cmd", hit Enter, and run "ipconfig". Look for the "Default Gateway" IPv4 address. On Mac, open System Settings > Network > Wi-Fi > Details > TCP/IP to find the "Router" IP.
What is the default IP address and login for OpenWrt routers?
The primary default gateway IP address for OpenWrt routers is 192.168.1.1 (with fallback subnets 192.168.1.1). The default web administrative address is 192.168.1.1. Out of the box, the default username is root and the default password is (Leave Blank - Set on LuCI).
How do I log in to my OpenWrt router settings?
1) Connect your computer or phone to your OpenWrt Wi-Fi or plug into a LAN Ethernet port.
2) Open a browser and type http://192.168.1.1 or http://192.168.1.1.
3) Enter username root and password (Leave Blank - Set on LuCI).
4) Access the dashboard to configure Wi-Fi password, SSID name, port forwarding, and security settings.
How do I factory reset my OpenWrt router?
With the OpenWrt router powered ON, locate the small Reset pinhole on the rear or bottom panel. Insert an unfolded paperclip or pin and hold the button down for 10 to 15 seconds until the power and Wi-Fi LEDs start flashing. Release the button and wait 2-3 minutes for the router to reboot into factory default state.
Does OpenWrt have an official mobile app for setup and controls?
Yes, OpenWrt offers the LuCI Web Interface available for iOS and Android smartphones. You can use it to set up new networks, monitor connected devices, run speed tests, and pause internet access.
How do I change the Wi-Fi name (SSID) and password on my OpenWrt router?
Log in to the OpenWrt admin page (http://192.168.1.1), navigate to Wireless, Wi-Fi Settings, or Basic > Wireless. Update the 2.4 GHz and 5 GHz Network Name (SSID) and set a secure WPA2/WPA3 password. Click Apply or Save to restart the wireless radios with your new settings.
Explore default login guides and IP addresses for alternative router brands: