Ubiquiti AmpliFi Router Default Login, IP & Password Guide
AmpliFi Alien (Wi-Fi 6), HD, and Instant consumer whole-home mesh routers with LCD touchscreen.
Use these verified administrative credentials and network addresses to access your Ubiquiti AmpliFi router's local setup dashboard.
amplifi.lan192.168.111.1192.168.111.1192.168.111.1adminAmpliFi App / Touchscreen SetupAmpliFi_XXXXXXConfigure via the front touchscreen display, official AmpliFi mobile app, or browser at http://amplifi.lan.
Follow this 4-step walkthrough to access your Ubiquiti AmpliFi management settings in less than 2 minutes.
Step 1: Connect to Network
Connect to AmpliFi Wi-Fi network or LAN port.
Step 2: Open Web GUI or Gateway IP
Open web browser to http://amplifi.lan or http://192.168.111.1.
Step 3: Enter Admin Credentials
Enter admin password established during initial mobile setup.
Step 4: Configure Settings & Save
View real-time touchscreen diagnostics and mesh node latency.
These default credentials and IP addresses apply to the following popular Ubiquiti AmpliFi wireless routers, mesh nodes, and modem gateways:
If the default password doesn't work or you forgot your custom administrator password, resetting the router restores all factory default settings.
- Make sure your Ubiquiti AmpliFi router is connected to power and the power LED is solid ON.
- Locate the physical Reset pinhole button on the back or bottom panel of the unit.
- Use a straightened paperclip, SIM ejector tool, or pin to press and hold down the Reset button for 10 to 15 seconds.
- Release the button once the front panel LED indicator lights begin flashing or turn amber.
- Wait 2 to 3 minutes for the router to complete its reboot cycle.
- Reconnect to the factory default Wi-Fi network (
AmpliFi_XXXXXX) and log in using usernameadminand passwordAmpliFi App / Touchscreen Setup.
Cannot reach amplifi.lan or 192.168.111.1 in browser
Ensure your device is connected directly to your Ubiquiti AmpliFi router's Wi-Fi network or plugged into a numbered LAN port with an Ethernet cable. If you are connected to cellular data or an active VPN, disconnect them as they route DNS requests away from the local router gateway.
Default login password "AmpliFi App / Touchscreen Setup" is not accepted
Check the physical sticker on the bottom or back of your Ubiquiti AmpliFi router. Many modern models print a unique factory admin password or Wi-Fi key. If the password was changed during initial setup and forgotten, press the Reset pinhole button for 10 seconds to restore factory credentials.
Browser displays "Connection Not Private" or SSL Certificate Warning
Most local router administration consoles use self-signed SSL certificates when accessed via HTTPS (https://192.168.111.1). Click "Advanced" and select "Proceed to 192.168.111.1 (unsafe)" to continue securely to the local management dashboard.
How to discover your Ubiquiti AmpliFi router's exact gateway IP address
On Windows, press Win+R, type "cmd", hit Enter, and run "ipconfig". Look for the "Default Gateway" IPv4 address. On Mac, open System Settings > Network > Wi-Fi > Details > TCP/IP to find the "Router" IP.
What is the default IP address and login for Ubiquiti AmpliFi routers?
The primary default gateway IP address for Ubiquiti AmpliFi routers is 192.168.111.1 (with fallback subnets 192.168.111.1). The default web administrative address is amplifi.lan. Out of the box, the default username is admin and the default password is AmpliFi App / Touchscreen Setup.
How do I log in to my Ubiquiti AmpliFi router settings?
1) Connect your computer or phone to your Ubiquiti AmpliFi Wi-Fi or plug into a LAN Ethernet port.
2) Open a browser and type http://amplifi.lan or http://192.168.111.1.
3) Enter username admin and password AmpliFi App / Touchscreen Setup.
4) Access the dashboard to configure Wi-Fi password, SSID name, port forwarding, and security settings.
How do I factory reset my Ubiquiti AmpliFi router?
With the Ubiquiti AmpliFi router powered ON, locate the small Reset pinhole on the rear or bottom panel. Insert an unfolded paperclip or pin and hold the button down for 10 to 15 seconds until the power and Wi-Fi LEDs start flashing. Release the button and wait 2-3 minutes for the router to reboot into factory default state.
Does Ubiquiti AmpliFi have an official mobile app for setup and controls?
Yes, Ubiquiti AmpliFi offers the AmpliFi WiFi App available for iOS and Android smartphones. You can use it to set up new networks, monitor connected devices, run speed tests, and pause internet access.
How do I change the Wi-Fi name (SSID) and password on my Ubiquiti AmpliFi router?
Log in to the Ubiquiti AmpliFi admin page (http://192.168.111.1), navigate to Wireless, Wi-Fi Settings, or Basic > Wireless. Update the 2.4 GHz and 5 GHz Network Name (SSID) and set a secure WPA2/WPA3 password. Click Apply or Save to restart the wireless radios with your new settings.
Explore default login guides and IP addresses for alternative router brands: